Kawasaki Lsi Driver

Hardware IDs USB VID05E9 or USB vendor ID (VID) 05E9 recognizes Kawasaki LSI as the USB vendor and manufacturer of the device or devices listed below. USB Vendor ID (VID), Device ID (PID) and SUBSYS ID are used to recognize the manufacturer and model of a devices. Kawasaki LSI Kawasaki LSI Inc. 501 Edgewater Drive Wakefield, MA 01880 USA tel: +1-888-654-5574 - Toll free in North America fax: +1-781-224-4201 [email protected] We, at Kawasaki LSI (Boston and San Jose), have developed a pin for pinreplacement for the Intel 80C152, for which Intel has stopped accepting orders.

kueKawasaki LSI KL5KUSB101B USB Ethernet device

kue* at uhub?

The kue driver provides support for USB Ethernet adapters based on the Kawasaki LSI KL5KLUSB101B chipset. This includes the following adapters:

  • What is the preferred name for this driver? I basically used LAN78XX because that was the naming scheme linux went with. It's kind of confusing as this driver is used for also LAN7515 on raspberry pi's. My suggestion is: ifumicro.c since it's for microchip, and it starts with a u like other FreeBSD's usb-to-ethernet drivers.
  • LSI Logic went public with Nasdaq as LSI in May 1983 with the largest IPO to date of $153 million. 7 In 1985, the firm entered into a joint venture with Kawasaki Steel —Japan's third largest steel manufacturer—to build a $100 million wafer fabrication plant in Tsukuba, Japan.
3Com 3c19250
3Com 3c460 HomeConnect
AboCom Systems URE450 Ethernet
ADS Technologies USB-10BT
Aox USB101
Asante USB to Ethernet
ATen DSB-650C
ATen UC10T
Corega USB-T
D-Link DSB-650C
Entrega NET-USB-E45
I/O Data USB-ET/T
Jaton USB XpressNet
Kawasaki USB101
Kingston Ethernet
Linksys USB10T
Mobility Ethernet
Netgear EA101
Peracom USB
Portgear Ethernet
Portsmith Express Ethernet
Psion Dacom Gold Port Ethernet
Shark Pocket Adapter
Silicom U2E
SMC 2102USB
SMC 2104USB

The KL5KLUSB101B supports a 128-entry multicast filter, single perfect filter entry for the station address and promiscuous mode. Packets are received and transmitted over separate USB bulk transfer endpoints.

The Kawasaki adapter supports only 10Mbps half-duplex mode, hence there are no ifmedia(4) modes to select.

For more information on configuring this device, see ifconfig(8).

Kawasaki

The driver needs a firmware file, which is loaded on demand when the device is attached:

kue0: watchdog timeout
A packet was queued for transmission and a transmit command was issued, however the device failed to acknowledge the transmission before a timeout expired.
kue0: no memory for rx list
The driver failed to allocate an mbuf for the receiver ring.

arp(4), intro(4), netintro(4), usb(4), hostname.if(5), ifconfig(8)

The kue device driver first appeared in FreeBSD 4.0. OpenBSD support was added in OpenBSD 2.7.

The kue driver was written by Bill Paul <‍[email protected]> and ported to OpenBSD by Aaron Campbell <‍[email protected]>.

The kue driver does not accumulate Ethernet collisions statistics because the Kawasaki firmware does not appear to maintain any internal statistics.

kueKawasaki LSI KL5KUSB101B USB Ethernet device

kue* at uhub?

The kue driver provides support for USB Ethernet adapters based on the Kawasaki LSI KL5KLUSB101B chipset. This includes the following adapters:

3Com 3c19250
3Com 3c460 HomeConnect
AboCom Systems URE450 Ethernet
ADS Technologies USB-10BT
Aox USB101
Asante USB to Ethernet
ATen DSB-650C
ATen UC10T
Corega USB-T
D-Link DSB-650C
Entrega NET-USB-E45
I/O Data USB-ET/T
Jaton USB XpressNet
Kawasaki USB101
Kingston Ethernet
Linksys USB10T
Mobility Ethernet
Netgear EA101
Peracom USB
Portgear Ethernet
Portsmith Express Ethernet
Psion Dacom Gold Port Ethernet
Shark Pocket Adapter
Silicom U2E
SMC 2102USB
SMC 2104USB

The KL5KLUSB101B supports a 128-entry multicast filter, single perfect filter entry for the station address and promiscuous mode. Packets are received and transmitted over separate USB bulk transfer endpoints.

The Kawasaki adapter supports only 10Mbps half-duplex mode, hence there are no ifmedia(4) modes to select.

Kawasaki Lsi Driver Review

For more information on configuring this device, see ifconfig(8).

Driver

The driver needs a firmware file, which is loaded on demand when the device is attached:

kue0: watchdog timeout
A packet was queued for transmission and a transmit command was issued, however the device failed to acknowledge the transmission before a timeout expired.
kue0: no memory for rx list
The driver failed to allocate an mbuf for the receiver ring.

arp(4), intro(4), netintro(4), usb(4), hostname.if(5), ifconfig(8)

Kawasaki Lsi Driver Parts

The kue device driver first appeared in FreeBSD 4.0. OpenBSD support was added in OpenBSD 2.7.

Kawasaki Lsi Drivers

Kawasaki Lsi Driver

Kawasaki Lsi Driver Reviews

The kue driver was written by Bill Paul <‍[email protected]> and ported to OpenBSD by Aaron Campbell <‍[email protected]>.

Kawasaki Lsi Driver Manual

The kue driver does not accumulate Ethernet collisions statistics because the Kawasaki firmware does not appear to maintain any internal statistics.